Product Center > Lab filtration > Syringe Filter > BioFil™ Syringe Filter

BioFil™ Syringe Filter
Bioyfil™ syringe filters design with a layer of prefilter. Ideal for filtering the solutions with a high load of particulate matter. All the Syringe filters are well packed, with competitive price filters. The membranes range from Nylon, CA, MCE, PES, PTFE, PVDF, GF, Regenerated Cellulose(RC)  to PP, which are supplied in 13mm and 25mm no virgin medical PP housings.
  Test Method:
 
Agilent Technologies 1200, Column: C18 UV = 254 nm Mob.phase:MeOH/H2O:20:80, Temperature: 25°C, Flow rate:0.8ml/min, sample:2mg/ml Bergenin(in Methanol)

 

Why to use a syringe filter?


Why choose Biofil™ Syringe Filter? 
       Futures

1. HPLC certification which guarantees the filters will not produce extraneous peaks in the UV range.
2. 100% integrity tested with higher burst strength ratings assuring they will perform consistently.
3. Suitable for solutions with a high load of particulate matter.
4. Larger handling capacity.
5. Long Life Time.

 






How to select your sample preparation device?
 Step 1: Choose the suitable membrane filtration medium Characteristics of samples
Solutions Recommended 
Solvent Mixtures Nylon, Hydrophilic PTFE,
Tissue culture Media, Buffers, Protein Analysis/ Biological Samples CA, PES, MCE, Hydrophilic PVDF
High Particulate Loads PP,GF, Filter with pre-filter
Aggressive or Pure Organic Solvents Hydrophobic PTFE, PVDF

Step2: choose the suitable diameter
 
Volume of samples Recommend
<10ml 13mm
<100ml 25mm
Step 3: Choose the suitable pore size based on the nature of your sample
          Removal of high particulate matter with a pre filter is critical before any drug, toxic, or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance.
 Generally, 0.45 μm porosity filters are used to remove particulates from samples and mobile phase solutions. For Sterile-filtration, a 0.20 μm porosity filter can be used.

Specification
Parameters 13mm 25mm
Filtration area (cm2) 0.92 3.9
Normal Pore Size(μm) 0.22 0.45 0.22 0.45
Holdup volume (μl) <10 <100
Sample volume (ml) <10 <120



Order Information
Part No. Membrane Pore Size(μm) Diameter
(mm)
Packing
(pcs/pk)
Online Price(USD/pk)
S13NY022B Nylon 0.22 13 100 $43.5
S13NY045B 0.45 13 100 $43.5
S13PTB022B Hydrophobic PTFE 0.22 13 100 $48.9
S13PTB045B 0.45 13 100 $48.9
S13PTL022B Hydrophilic PTFE 0.22 13 100 $70.2
S13PTL045B 0.45 13 100 $70.2
S13PES022B PES 0.22 13 100 $48.9
S13PES045B 0.45 13 100 $48.9
S13PVB022B Hydrophobic PVDF 0.22 13 100 $48.9
S13PVB045B 0.45 13 100 $48.9
S13PVL022B Hydrophilic PVDF 0.22 13 100 $70.2
S13PVL045B 0.45 13 100 $70.2
S13CA022B CA 0.22 13 100 $43.5
S13CA045B 0.45 13 100 $43.5
S13MCE022B MCE 0.22 13 100 $43.5
S13MCE045B 0.45 13 100 $43.5
S13PP022B PP 0.22 13 100 $43.5
S13PP045B 0.45 13 100 $43.5
S13RC022B RC 0.22 13 100 $70.2
S13RC045B 0.45 13 100 $70.2










 






Part No. Membrane Pore Size(μm) Diameter
(mm)
Packing
(pcs/pk)
Online Price(USD/pk)
S25NY022B Nylon 0.22 25 100 $59.1
S25NY045B 0.45 25 100 $59.1
S25PTB022B Hydrophobic PTFE 0.22 25 100 $64.5
S25PTB045B 0.45 25 100 $64.5
S25PTL022B Hydrophilic PTFE 0.22 25 100 $95.7
S25PTL045B 0.45 25 100 $95.7
S25PES022B PES 0.22 25 100 $64.5
S25PES045B 0.45 25 100 $64.5
S25PVB022B Hydrophobic PVDF 0.22 25 100 $64.5
S25PVB045B 0.45 25 100 $64.5
S25PVL022B Hydrophilic PVDF 0.22 25 100 $95.7
S25PVL045B 0.45 25 100 $95.7
S25CA022B CA 0.22 25 100 $59.1
S25CA045B 0.45 25 100 $59.1
S25MCE022B MCE 0.22 25 100 $59.1
S25MCE045B 0.45 25 100 $59.1
S25PP022B PP 0.22 25 100 $59.1
S25PP045B 0.45 25 100 $59.1
S25RC022B RC 0.22 25 100 $95.7
S25RC045B 0.45 25 100 $95.7

Prev:GF syringe filter Next:Chromfil™ Syringe Filter
syringe filters, chromatography vials, SPE and biotechnology products are produced according to ISO9001 standard system.  Sitemap